Analysis of morphometric changes in the anterior alveolar bone in bimaxillary protrusion adult patients after retraction with cone-beam CT / 中华口腔医学杂志

Objective: To measure and analyze the morphometric changes in the anterior alveolar bone during treatment and retention stage after retraction in bimaxillary adults using cone-beam CT(CBCT). Methods: Fifteen adult patients, four males and 11 females, aged 19 to 28 years[(22.2±3.1) years], who have completed orthodontic treatment and extracted four first premolar teeth for retraction in the Department of Orthodontics, The Affiliated Stomatological Hospital of Nanchang University from January 2016 to December 2018 were selected. CBCT was taken to assess the labial and palatal vertical bone level, total bone thickness at crest area, middle root area and apical area in pre-treatment (T1), post-treatment (T2) and at follow-up (maintained for more than two years) (T3). The differences in alveolar bone morphology at different stages were compared by single factor repeated measure ANOVA, and Pearson correlation analysis was performed on the amount of alveolar bone change in treatment stage and retention stage. Results: There were statistically significant differences in the alveolar bone height of the palatal side of maxillary anterior teeth, the labial side of maxillary lateral incisors and canine among three time points (P<0.05). The height difference of palatal alveolar bone of anterior teeth in T1-T2 stage was statistically significant (P<0.05). Palatal alveolar bone of upper and lower central incisors decreased by (1.52±0.32) and (4.96±0.46) mm, respectively. The height difference of anterior palatal alveolar bone was statistically significant in T2-T3 stage(P<0.05), the palatal alveolar bone height of central incisors increased by (1.20±0.27) and (3.14±0.35) mm respectively. The height difference of palatal alveolar bone in the anterior teeth of T1-T3 stage was statistically significant (P<0.05), and the height of palatal alveolar bone of central incisors was decreased (0.33±0.11) and (1.82±0.39) mm, respectively. There were statistically significant differences in the thickness of the cervical and middle root alveolar bone of anterior teeth among three time points (P<0.05). The difference of alveolar bone thickness of the cervical and middle root of anterior teeth at T1-T2 was statistically significant (P<0.05). decreased by (0.63±0.10) and (0.67±0.09) mm in lateral incisors, respectively. In the T2-T3 stage, the alveolar bone thickness of the crest area of the lower anterior teeth was significantly different (P<0.05), the alveolar bone thickness of mandibular central incisor crest area increased (0.09±0.03) mm. There were statistically significant differences in alveolar bone thickness in crest area and middle root of the incisors during T1-T3 stage (P<0.05), among which the middle root decreased by (0.38±0.16) mm and (0.63±0.13) mm, respectively. There was no statistically significant difference in other areas (P>0.05). The change of alveolar bone height in palatal side of upper anterior teeth at T2-T3 was very strongly negatively correlated with the change in T1-T2. The change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor root and neck were moderately strongly negatively correlated (r≤-0.8, P<0.001), the change of alveolar bone height in labial side of upper anterior teeth and lingual side of lower anterior teeth and the thickness of incisor crest area were moderately strongly negatively correlated (-0.8<r≤-0.4, P<0.05). Conclusions: For adult patients after retraction, anterior alveolar bone decreased significantly. In the retention stage, the same degree of bone apposition will occur, but still have alveolar bone loss compared with pre-treatment. The amount of alveolar bone change in the retention stage correlated with the amount of alveolar bone change in the treatment stage.

Non-surgical rapid maxillary expansion with mini-implants in adults: a narrative review / Expansión rápida maxilar no quirúrgica con miniimplantes en adultos: una revisión narrativa

Introduction: In recent years, rapid maxillary expansion (RME) in prepubertal growth stages has been deeply investigated; however, its study has recently been increasing in adults without need for surgery. The objective of this review is to present the results reported in the scientific literature about RME in adults. Material and Methods: Six databases were used to carry out the secondary search of the review. The search was performed virtually and studies from the last six years were considered, with a last search performed until November, 2022. Results: A total of 253 studies were found, from which 20 studies were finally selected. RME in adults can result in substantial expansion similar to that obtained in patients who have not yet completed the ossification of the mid-palatal suture. Conclusion: The reviewed scientific literature shows evidence that there are various devices supported by mini-implants as non-surgical treatment options to correct transverse deficiency and help expand the maxilla in adult patients.

Introducción: En los últimos años se ha investigado profundamente la expansión maxilar rápida (ERM) en etapas de crecimiento prepuberal; sin embargo, recientemente se ha ido incrementando su estudio en adultos sin necesidad de cirugía. El objetivo de esta revisión es presentar los resultados reportados en la literatura científica sobre ERM en adultos. Material y Métodos: Se utilizaron seis bases de datos para realizar la búsqueda secundaria de la revisión. La búsqueda se realizó de manera virtual y se consideraron estudios de los últimos seis años, con una última búsqueda realizada hasta noviembre de 2022. Resultados: Se encontraron un total de 253 estudios, de los cuales finalmente se seleccionaron 20 estudios. La ERM en adultos puede dar como resultado una expansión sustancial similar a la obtenida en pacientes que aún no han completado la osificación de la sutura palatina media. Conclusión: La literatura científica revisada muestra evidencia que existen diversos dispositivos apoyados en mini-implantes como opciones de tratamiento no quirúrgico para corregir la deficiencia transversal y ayudar a generar disyunción maxilar en pacientes adultos.

Injerto de hueso calvarial envuelto en colgajo pediculado de fascia temporo-parietal para reconstrucción de reborde cigomático-maxilar e infraorbitario: reporte de caso / Calvarial bone graft wrapped in temporo-parietal fascia pedicled flap for zygomatico-maxillary and infraorbital rim reconstruction: case report

La reconstrucción posterior a una cirugía oncológica resectiva maxilar es todo un desafío. Debido a esto, existen diversas técnicas quirúrgicas cuyo objetivo apunta a mantener no solo la funcionalidad, sino también la estética facial, especialmente en el área del reborde infraorbitario. El injerto de hueso calvarial es una opción segura y versátil para realizar una reconstrucción primaria en el reborde infraorbitario. Esta técnica está indicada en aquellos pacientes en los cuales la resección cutánea y exenteración orbitaria no son necesarias. Por este motivo, a continuación, analizaremos este tipo de injerto a propósito de un caso clínico en el que se usó asociado a un colgajo pediculado de fascia temporoparietal.

Reconstruction after maxillary resective oncological surgery is a challenge. Because of this, there are many surgical techniques whose objective is to maintain not only function but also facial aesthetics, especially in the infraorbital rim area. The calvarial bone graft is a safe and versatile option to perform a primary infraorbital rim reconstruction. This technique is indicated in those patients in whom skin resection and orbital exenteration are not necessary. For this reason, we will now analyze this type of graft in relation to a case in which it was used associated with a temporo-parietal fascia flap.

Craniofacial morphology in patients with obstructive sleep apnea: cephalometric evaluation / Morfologia craniofacial em pacientes com apneia obstrutiva do sono: avaliação cefalométrica

Abstract Introduction: Obstructive sleep apnea is characterized by a reduced airflow through the upper airways during sleep. Two forms of obstructive sleep apnea are described: the central form and the obstructive form. The obstructive form is related to many factors, such as the craniofacial morphology. Objective: To evaluate the correlation between the morphology of the cranial base, of the mandible and the maxilla, and obstructive sleep apnea severity. Methods: Eighty-four patients, mean age of 50.4 years old; 73 males and 11 females with obstructive sleep apnea were enrolled in the present study. Patients with high body mass index and comorbidities were excluded. Lateral cephalograms and polysomnography were collected for each patient to evaluate the correlation between craniofacial morphology and obstructive sleep apnea severity. A Spearman's rho correlation test between cephalometric measurements and obstructive sleep apnea indexes was computed. Statistical significance was set at p < 0.05. Results: Patients with a severe obstructive sleep apnea presented a reduction of sagittal growth of both effective mandibular length and cranio-basal length. The mandibular length was the only variable with a statistical correlation with apnea-hypopnea index. Vertical dimension showed a weak correlation with the severity of obstructive sleep apnea. No correlation with maxillary sagittal dimension was shown. Conclusion: Obstructive sleep apnea severity may be correlated to mandibular and cranial base growth. Facial vertical dimension had no correlation with obstructive sleep apnea severity.

Resumo Introdução: A apneia obstrutiva do sono é caracterizada por um fluxo de ar reduzido nas vias aéreas superiores durante o sono. Duas formas de apneia são descritas: a forma central e a forma obstrutiva. A forma obstrutiva tem sido relacionada a vários fatores, como a morfologia craniofacial. Objetivo: Avaliar a correlação entre a morfologia da base do crânio, da mandíbula e da maxila e a gravidade da apneia obstrutiva do sono. Método: Foram incluídos no presente estudo 84 pacientes com apneia obstrutiva do sono, com média de 50,4 anos; 73 homens e 11 mulheres. Pacientes com alto índice de massa corpórea e comorbidades foram excluídos. Foram coletados cefalogramas laterais e polissonografia para cada paciente para avaliar a correlação entre a morfologia craniofacial e a gravidade da apneia. Foi computado o coeficiente de correlação de postos de Spearman (rho) entre medidas cefalométricas e índices de apneia obstrutiva do sono. A significância estatística foi estabelecida em p < 0,05. Resultados: Pacientes com apneia obstrutiva do sono grave apresentaram redução do crescimento sagital do comprimento mandibular efetivo e do comprimento crânio-basal. O comprimento mandibular foi a única variável que apresentou correlação estatística com o índice de apneia-hipopneia. A dimensão vertical mostrou uma fraca correlação com a gravidade da apneia. Não foi demonstrada correlação com a dimensão maxilar sagital. Conclusão: A gravidade da apneia obstrutiva do sono pode estar correlacionada ao crescimento da base mandibular e craniana. A dimensão facial vertical não apresentou correlação com a gravidade da apneia.

Digitalized analysis of the gingival and bone morphology in the maxillary anterior teeth in patient with posterior dental implant / 中华口腔医学杂志

Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle.

Digital analysis of the correlation between gingival thickness and alveolar bone thickness in the maxillary anterior teeth region / 中华口腔医学杂志

Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.

A cone-beam computed tomography evaluation of three-dimensional changes of circummaxillary sutures following maxillary protraction with alternate rapid palatal expansions and constrictions / 北京大学学报(医学版)

OBJECTIVE@#To assess three-dimensional (3D) changes of circummaxillary sutures following maxillary protraction with alternate rapid palatal expansions and constrictions (RPE/C) facemask protocol in maxillary retrusive children, and to investigate the relationship between the changes of circum-maxillary sutures and zygomaticomaxillary suture (ZMS) maturation, and to explore the factors of maxilla forward movement with RPE/C and facemask.@*METHODS@#In the study (clinical trial registration No: ChiCTR2000034909), 36 maxillary retrusive patients were recruited and block randomized to either the rapid palatal expansion (RPE) group or the RPE/C group. Patients aged 7 to 13 years, Class Ⅲ malocclusion, anterior crossbite, ANB less than 0°, Wits appraisal less than -2 mm, and A-Np less than 0 mm were included in the study. The RPE group received rapid palatal expansion, whereas the RPE/C group received alternate rapid palatal expansions and constrictions, and both with facemask protraction. Head orientations of cone-beam computed tomography (CBCT) images were implemented by Dolphin 11.7. 3D measurements of circummaxillary sutures on CBCT images were evaluated using Mimics 10.01 before (T0) and after treatment (T1). The changes were analyzed with independent t test, two-way ANOVA, Pearson correlation and regression analysis.@*RESULTS@#Two subjects in the RPE/C group were lost to follow-up. A total of 34 patients reached the completion criteria and were analyzed. Compared with the RPE group, sagittal changes of circummaxillary sutures were significantly increased in the RPE/C group with 1.21 mm advancement of zygomaticotemporal suture, 2.20 mm of ZMS, 1.43 mm of zygoma-ticofrontal suture (P < 0.05, respectively). Except for the zygomaticotemporal suture, the rest forward sagittal changes of other circummaxillary sutures showed no major difference in terms of the ZMS maturation. The Spearman's correlation in RPE/C indicated a strong positive correlation of sagittal changes between ZMS and point A (P < 0.01) with a regression analysis R2=42.5%.@*CONCLUSION@#RPE/C might be more effective on the treatment of maxillary retrusive children. As one of the major mechanical loading sutures during orthopedic therapy, ZMS showed a strong positive correlation with point A on sagittal changes.

Efficacy of vertical control by using mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients / 北京大学学报(医学版)

OBJECTIVE@#To investigate the efficacy of vertical control by using conventional mini-implant anchorage in maxillary posterior buccal area for Angle class Ⅱ extraction patients.@*METHODS@#Twenty-eight Angle class Ⅱ patients [9 males, 19 females, and age (22.6±2.8) years] were selected in this study. All of these patients were treated by using straight wire appliance with 4 premolars extraction and 2 mini-implant anchorage in maxillary posterior buccal area. In this study, the self-control method was used to measure and analyze the lateral radiographs taken before and after orthodontic treatment in each case, the main cephalometric analysis items were related to vertical changes. The digitized lateral radiographs were imported into Dolphin Imaging Software (version 11.5: Dolphin Imaging and Management Solutions, Chatsworth, California, USA), and marked points were traced. Each marked point was confirmed by two orthodontists. The same orthodontist performed measurement on the lateral radiographs over a period of time. All measurement items were required to be measured 3 times, and the average value was taken as the final measurement result.@*RESULTS@#Analysis of the cephalometric radiographs showed that, for vertical measurements after treatment, the differences of the following measurements were highly statistically significant (P < 0.001): SN-MP decreased by (1.40±1.45) degrees on average, FMA decreased by (1.58±1.32) degrees on average, the back-to-front height ratio (S-Go/N-Me) decreased by 1.42%±1.43% on average, Y-axis angle decreased by (1.03±0.99) degrees on average, face angle increases by (1.37±1.05) degree on average; The following measurements were statistically significant (P < 0.05): the average depression of the upper molars was (0.68±1.40) mm, and the average depression of the upper anterior teeth was (1.07±1.55) mm. The outcomes indicated that there was a certain degree of upper molar depression after the treatment, which produced a certain degree of counterclockwise rotation of the mandibular plane, resulting in a positive effect on the improvement of the profile.@*CONCLUSION@#The conventional micro-implant anchorage in maxillary posterior buccal area has a certain vertical control ability, and can give rise to a certain counterclockwise rotation of the mandible, which would improve the profile of Angle Class Ⅱ patients.

Correlation between cortical bone thickness at mini-implant insertion sites and age of patient

ABSTRACT Introduction: Orthodontic mini-implants (MI) are a reliable alternative to provide temporary orthodontic anchorage. Prior to miniscrew insertion, the best approach would be to evaluate each possible insertion site and measure the cortical bone thickness, and verify whether it would provide adequate primary stability. Objective: This study aimed to evaluate the difference in cortical bone thickness in areas of mini-implants insertion in patients of different ages, by means of cone beam computed tomography (CBCT). Methods: The sample of this retrospective study was composed of 123 CBCT scans, which were used to measure cortical bone thickness in the buccal and palatal inter-radicular space in the mesial region of the first permanent molars. These measures were compared by using the Student's t-test, ANOVA/Tukey tests, and Linear regression between male and female subjects, from 12 to 30 years old. Results: No significant difference was found in cortical bone thickness between sex, race and sagittal facial patterns. Significantly higher measurement values were observed in patients older than 12 years of age at all sites evaluated. The coefficient β at the adjusted linear regression analysis showed that at each increment in age, mean cortical thickness values increased by 0.06mm in the mandible, 0.03mm in the buccal region and 0.02mm in the palatal region of the maxilla. Conclusions: The increase in cortical bone thickness was positively associated with age; that is, the more advanced the patient's age was, the less chance there was of failure due to primary stability.

RESUMO Introdução: Os mini-implantes ortodônticos (MI) são uma alternativa confiável para fornecer ancoragem esquelética temporária. Antes da inserção do mini-implante, a melhor abordagem seria avaliar cada local de inserção possível, medir a espessura do osso cortical e verificar se proporcionaria uma adequada estabilidade primária. Objetivo: O presente estudo teve como objetivo avaliar a diferença na espessura do osso cortical em áreas de inserção dos mini-implantes em pacientes de diferentes idades, por meio da tomografia computadorizada de feixe cônico. Métodos: A amostra desse estudo retrospectivo foi composta por 123 tomografias computadorizadas de feixe cônico, que foram utilizadas para medir a espessura do osso cortical nos espaços inter-radiculares vestibular e palatino na região mesial dos primeiros molares permanentes. Essas medidas foram comparadas por meio dos testes t de Student, ANOVA/Tukey e regressão linear entre os sexos masculino e feminino, de 12 a 30 anos. Resultados: Não houve diferença estatisticamente significativa na espessura cortical, quando comparados sexo, cor da pele e padrão facial sagital. Foram verificadas medidas significativamente maiores em pacientes com idade superior a 12 anos em todos os sítios avaliados. O coeficiente β da análise de regressão linear ajustada mostrou que, a cada incremento da idade, os valores médios da espessura cortical aumentaram 0,06 mm na mandíbula, 0,03 mm na região vestibular e 0,02 mm na região palatina da maxila. Conclusão: O aumento da espessura do osso cortical teve associação positiva com a idade, ou seja, quanto mais avançada a idade do paciente, menor a chance de falha, devido à estabilidade primária.

Anatomical study of the canalis sinuosus in Chilean individuals by cone-beam computed tomography / Estudio anatómico del canal sinuoso en individuos chilenos mediante tomografía computarizada cone-beam

SUMMARY: The canalis sinuosus (CS) is a double-curved bone canal in the anterior region of the maxilla. The CS contains a vasculo-nervous bundle consisting of the anterior superior alveolar nerve and its corresponding arteries and veins. The CS and its accessory canals (AC) have been little described in the literature and are often omitted in imaging evaluations before procedures in the region. The object of the present study was to evaluate the frequency of the CS and its AC in Chilean individuals, and to carry out a morphometric analysis of these anatomical structures by cone-beam computed tomography (CBCT) by sex, side and age range. CBCT examinations of 28 patients were studied, evaluating the presence, diameter and terminal portion of the CS. We also evaluated the presence and number of AC, and their terminal portion. The diameter of the AC was classified as greater or smaller than 1.0 mm. Non-parametric tests were used for quantitative variables and chi-squared for qualitative variables. The SPSS v.27.0 software was used, with a significance threshold of 5 %. The CS was present in all the samples analysed, generally presenting a diameter greater than 1.0 mm. Alterations were found, and the diameter could be greater depending on the segment evaluated, however it was not affected by sex, side or age range. The terminal portion of the CS is usually located adjacent to the region of the nasal cavity. The frequency of AC was very high, and the most common location was in the region of the upper central incisor; in 61.3 % of cases their diameter ?1.0 mm. The high frequency of CS and AC shows the importance of carrying out a detailed imaging study before invasive procedures in the anterior region of the maxilla.

RESUMEN: El canal sinuoso (CS) es un canal óseo que presenta doble curvatura, ubicado en la región anterior de maxila. El CS contiene un paquete vásculonervioso formado por nervio alveolar superior anterior, arterias y venas correspondientes. El CS y sus canales accesorios (CA) han sido poco descritos en la literatura y muchas veces son omitidos en evaluaciones imagenológicas previas a procedimientos en la región. El objetivo del presente estudio fue evaluar la frecuencia del CS y de sus CA en individuos Chilenos, bien como realizar un análisis morfométrico de estas estructuras anatómicas mediante tomografía computarizada cone-beam (TCCB) según sexo, lado y rangos etarios. Fueron evaluados exámenes de TCCB de 28 pacientes. Se evaluó la presencia, diámetro y porción terminal del CS. Se evaluó la presencia del CA, cantidad y porción terminal. El diámetro del CA fue clasificado en mayor o menor a 1,0 mm. Se utilizaron pruebas no paramétricas para variables cuantitativas y chi-cuadrado para variables cualitativas. Se utilizó el software SPSS 27.0, considerándose umbral de significación de 5 %. El CS estuvo presente en todas las muestras analizadas, presentando en general un diámetro mayor a 1,0 mm. El diámetro del CS sufre alteraciones pudiendo ser mayor dependiendo de la región evaluada, sin embargo no se ve afectado por sexo, lado o rangos etarios. La porción terminal de CS suele ubicarse adyacente a la región de cavidad nasal. La frecuencia de CA es muy alta, en un 61,3 % presentan diámetro ?1,0 mm, siendo la región de incisivo central superior su ubicación más común. La alta frecuencia de CS y de CA demuestra la importancia de realizarse un detallado estudio imagenológico previo a procedimientos invasivos en región anterior de la maxila.

Root anatomy and canal configuration of maxillary premolars: a cone-beam computed tomography study / Anatomía de la raíz y configuración del conducto de los premolares maxilares: estudio de tomografía computarizada de haz cónico

SUMMARY: The aim of the study was to determine the number and anatomical configuration of roots and root canals of maxillary first and second premolars using cone-beam computed tomography scans. n273 CBCT scans were evaluated, obtaining a sample of 592 maxillary premolars. Root number and root canal anatomy were categorized using Ahmed´s classification. Data was analyzed using Pearson's Chi-squared test. Two roots were present on 157 first premolars, one root in 132 premolars and three roots in 17. Second premolars presented one root in 266 samples and two roots in 20; no second premolars presented three roots. Eight different configurations were found; the most frequent was 2MP B1 P1 in first premolars (51,3 %) and 1MP1 (63.6 %) in second premolars. The most frequent morphology found in maxillary premolars in Chilean population was two and three roots. The analysis of internal anatomy using CBCT revealed a highly variable distribution of root canals, generally of low to medium complexity, similar to what is found in other ethnic groups.

RESUMEN: El objetivo de este estudio fue determinar el número y la configuración de raíces y canales radiculares de primeros y segundos premolares maxilares utilizado tomografía computacional de haz cónico. 273 TCHC fueron evaluados, obtenido una muestra de 592 premolares maxilares. El número de raíces y la anatomía de los canales radiculares fueron categorizados utilizando la clasificación de Ahmed. Los datos fueron analizados con la prueba Chi- Cuadrado de Pearson. Dos raíces fueron observadas en 157 primeros presentaron una raíz en 266 muestras y dos raíces en 20; no se encontraron tres raíces en segundos premolares. Ocho diferentes configuraciones fueron encontradas; siendo la más frecuente 2MP B1 P1 en primeros premolares (51,3 %) y 1MP1 (63,6 %) en segundos premolares. La morfología radicular más frecuentemente encontrada en premolares de población Chilena fue de dos y tres raíces. El análisis de la anatomía interna usando TCHC mostró una gran variabilidad de en la distribución de los canales radiculares. Generalmente de mediana y baja complejidad como los encontrados en otros grupos etnicos.

Morphometric analysis of infraorbital foramen using cone beam computed tomography in a cohort of Sri Lankan adults / Análisis morfométrico del foramen infraorbitario mediante tomografía computarizada de haz cónico en una cohorte de adultos de Sri Lanka

SUMMARY: Infraorbital foramen (IOF) located bilaterally within the maxillary bone about 1 cm inferior to the infraorbital margin is a vital landmark when delivering local anesthesia and during surgical interventions in the midface region. A total of 122 infraorbital foramina in 61 cone beam computed tomographic (CBCT) images of 32 females and 29 males in the age range of 17 to 32 were analyzed to determine the shape, direction, presence of accessory foramina, size and the precise position of IOF in relation to the inferior orbital margin (IOM), maxillary midline (MM), lateral nasal wall (LNW), alveolus (ALV) and maxillary teeth in a group of Sri Lankan people. The IOF was oval in shape (80.3 % and 88.5 % on the right and left side, respectively) in a majority of individuals. The infraorbital foramina were located at a mean distance of 5.56 ± 3.95 and 4.91 ± 2.08 mm, below the IOM on the right and left side, 27.13 ± 2.6 and 26.99 ± 2.73 on the right and left side from the mid maxillary line, 11.96 ± 3.45 mm and 12.18 ± 3.35 from the LNW on the right and left side and 29.59 ± 3.59 and 29.65 ± 3.28 above the alveolar crest on the right and left side. There were no statistically significant differences between the left and right sides or between sexes. Majority of IOF (37.5 % and 55.9 % on the right and left side, respectively) were located in the vertical plane passing though the maxillary second premolar tooth.

RESUMEN: El foramen infraorbitario (FIO) ubicado bilateralmente dentro de la maxila, aproximadamente 1 cm inferior al margen infraorbitario, es un punto de referencia vital cuando se administra anestesia local y durante intervenciones quirúrgicas en la región media de la cara. Se analizaron un total de 122 forámenes infraorbitarios en 61 imágenes de tomografía computarizada de haz cónico (CBCT) de 32 mujeres y 29 hombres en un rango etario de 17 a 32 años para determinar la forma, dirección, presencia de forámenes accesorios, tamaño y posición precisa de FIO en relación con el mar- gen orbitario inferior (MOI), la línea mediana maxilar (MM), la pared nasal lateral (PNL), el alvéolo (ALV) y los dientes maxilares en un grupo de personas de Sri Lanka. En la mayoría de los adultos se observó que el FIO tenía forma ovalada (80,3 % y 88,5 % en el lado derecho e izquierdo, respectivamente) Los forámenes infraorbitarios se ubicaron a una distancia media de 5,56 ± 3,95 y 4,91 ± 2,08 mm, por debajo del MOI en los lados derecho e izquierdo; 27,13 ± 2,6 y 26,99 ± 2,73 en el lado derecho e izquierdo desde la línea maxilar mediana, 11,96 ± 3,45 mm y 12,18 ± 3,35 de la PNL en el lado derecho e izquierdo y 29,59 ± 3,59 y 29,65 ± 3,28 por encima de la cresta alveolar en los lados derecho e izquierdo. No hubo diferencias estadísticamente significativas entre los lados izquierdo y derecho o entre sexos. La mayoría de IOF (37,5 % y 55,9 % en el lado derecho e izquierdo, respectivamente) se ubicaron en el plano vertical que pasa por el segundo premolar maxilar.

Radiografía panorámica: una herramienta invaluable para el estudio del componente óseo y dental del territorio maxilofacial / Panoramic radiographs: an invaluable tool for the study of bone and teeth components in the maxillofacial region

RESUMEN: La radiografía panorámica es probablemente el examen de rutina más solicitado por los dentistas en el mundo. Entre sus ventajas están su bajo costo, rapidez y mayor seguridad debido a que los formatos digitales han permitido disminuir las dosis y tiempos de exposición a la radiación. Su potencial como herramienta diagnóstica radica en la posibilidad que tiene el clínico de observar el territorio maxilofacial casi en su totalidad, pudiendo realizar un estudio anatómico y morfológico acabado de diferentes regiones. En esta revisión se quiere ofrecer una mirada general de la amplia gama de usos que se le pueden dar a la radiografía panorámica, tanto en la clínica como en el ámbito de la investigación, destacando su potencial como herramienta de diagnóstico y su importancia para algunas áreas de especialidad en odontología.

SUMMARY: The panoramic radiograph is in all likelihood, the routine exam most required by dentists in the clinic worldwide. Among the advantages of using this type of radiograph, is that it is inexpensive, quick and also safer in digital format since it reduces the radiation dose and time of exposure. Its potential as a diagnostic tool is based on the possibility to explore almost all of the maxillofacial area, allowing a proper anatomic and morphological study of different areas at the same time. In this review, we aimed to provide an overview of the multiple uses of panoramic radiographs, highlighting its potential as a diagnostic tool and also its importance in some specialized areas of dentistry.

Micro-CT evaluation of maxillary first molars: interorifice distances and internal anatomy of the mesiobuccal root

Abstract: This study aimed to describe the morphometric relationship of root canal orifices on the pulp floor in the presence/absence of mesiobuccal second canal (MB2) in the maxillary first molars and other aspects of its internal anatomy. Sixty-two maxillary first molars were scanned by micro-CT. The presence of the MB2 canal was verified. The distance between the center points of the MB1, MB2, distobuccal (DB), and palatal (P) canal orifices on the pulp floor were measured (MB1-MB2, MB1-DB, MB2-DB, MB1-P, and DB-P). The MB1-P to DB-P ratio was calculated. The distances between the anatomic apex and the MB1 and MB2 apical foramina were measured. The length of the band-shaped isthmus was also measured. Student's t-test was applied to verify the association between the presence of an MB2 canal, the interorifice distances, and the ratio of the MB1-P to DB-P distance (α = 5%). The MB2 canal was present in 43 roots (69.35%). Statistics showed significant differences when MB2 was present for the largest MB1-P distance (p < 0.05) and higher values for the MB1-P to DB-P ratio (p < 0.05). A band-shaped isthmus was detected in 25.8% of MB roots. The mean distance from the apical foramen to the isthmus floor ranged from 1.74 for MB1 canals to 1.42 for MB2 canals. Canal orifice distances on the pulp floor may predict the presence of MB2 canals. There was a high incidence of isthmus, accessory canals, and apical delta in the critical apical zone in MB roots of maxillary first molars.

Factors affecting the stability of maxillary extraction site closure

ABSTRACT Introduction: A side effect observed in cases treated with extractions is the instability of orthodontic space closure. Objective: The aim of this study was to investigate the influence of gingival invagination, presence of third molars and facial pattern, on the stability of orthodontic space-closure in the maxillary arch. Methods: Ninety-nine subjects (41 male and 58 female) with Class I malocclusion treated with four premolars extraction were evaluated. Extraction sites reopening and gingival invaginations were evaluated in scanned dental models in the posttreatment and 1-year posttreatment stages (mean age 16.1 years). Third molars presence was evaluated at 1-year posttreatment panoramic radiographs, and the facial pattern (SN.GoGn) was evaluated in the initial lateral headfilms. Multiple logistic regression analysis was used to estimate the influence of the aforementioned independent variables on the frequency of extraction space reopening. Results: Space reopening was observed in 20.20% of the subjects 1-year post-debonding. Gingival invaginations were present in 25.73% of quadrants after debonding and in 22.80% 1-year posttreatment. The mean pre-treatment SN.GoGn was 35.64 degrees (SD=5.26). No significant influence was observed of the three independent variables on the instability of extraction site closure. Conclusions: The presence of gingival invaginations, third molars and facial growth pattern do not seem to influence maxillary extraction sites reopening.

RESUMO Introdução: Um efeito colateral observado nos casos tratados com extrações é a instabilidade do fechamento ortodôntico do espaço. Objetivo: O objetivo do presente estudo foi investigar a influência da invaginação gengival, da presença de terceiros molares e do padrão facial na estabilidade do fechamento ortodôntico dos locais de extração na arcada superior. Métodos: Noventa e nove indivíduos (41 homens e 58 mulheres) com má oclusão de Classe I tratados com extração de quatro pré-molares foram avaliados. A reabertura dos locais de extração e as invaginações gengivais foram avaliadas nos modelos dentários digitalizados nos estágios pós-tratamento e um ano pós-tratamento (idade média de 16,1 anos). A presença dos terceiros molares foi avaliada em radiografias panorâmicas de um ano pós-tratamento, e o padrão facial (SN.GoGn) foi avaliado nas radiografias laterais iniciais. Análise de regressão logística múltipla foi utilizada para estimar a influência das variáveis independentes citadas na frequência de reabertura do espaço de extração. Resultados: A reabertura do espaço foi observada em 20,20% dos sujeitos um ano após a remoção do aparelho. Invaginações gengivais estiveram presentes em 25,73% dos quadrantes após a remoção do aparelho e em 22,80% após um ano pós-tratamento. O SN.GoGn pré-tratamento médio foi de 35,64 graus (DP = 5,26). Não foi observada influência significativa das três variáveis independentes sobre a instabilidade do fechamento do local de extração. Conclusões: A presença de invaginações gengivais, terceiros molares e padrão de crescimento facial não parece influenciar na reabertura dos locais de extração maxilar.

Tomographic analysis of midpalatal suture prior to rapid maxillary expansion

ABSTRACT Introduction: In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME). Description: Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area. Results: The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C. Conclusions: Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.

RESUMO Introdução: Em Ortodontia e Ortopedia Facial, o momento de início do tratamento pode ser crítico, e uma análise individual deve ser aplicada para promover um planejamento de tratamento favorável. No presente estudo, foram realizadas a avaliação individualizada da sutura palatina mediana (SPM) e medições no palato de adolescentes e adultos jovens tratados com expansão rápida da maxila (ERM). Descrição: Foram avaliados vinte e seis pacientes submetidos à ERM com aparelho dentossuportado (Hyrax). Os critérios de inclusão foram: idade mínima de 14 anos, apresentando todos os dentes posteriores, diagnosticado com discrepância transversa da maxila e com uma indicação clínica para expansão maxilar. A tomografia computadorizada de feixe cônico (TCFC) pré-tratamento desses pacientes foi avaliada para obter os estágios de maturação da SPM (MSPM), densidade da SPM (DSPM), comprimento do palato, espessura (anterior, intermediária e posterior) e área sagital. Resultados: Os estágios de maturação presentes foram C, D ou E; a densidade variou de 0,6 a 1, e foram determinados grupos de baixa (DSPM < 0,75) e alta densidade (DSPM ≥ 0,75). Indivíduos com maior DSPM apresentaram menor área sagital, em comparação com o grupo de densidade mais baixa. Indivíduos nos estágios D e E de MSPM apresentaram menor área sagital e espessura intermediária, comparados aos indivíduos no estágio C. Conclusão: Uma menor área sagital palatina foi observada nos grupos de alta DSPM e nos estágios D e E de MSPM.

Dentofacial and skeletal pattern in African descendants from southeastern Brazil: clinical prospective study

ABSTRACT Objective: The aim of this study was to evaluate characteristics of African-Brazilians young adults with excellent dental occlusion, including bimaxillary protrusion; compare them to European-American Caucasian standards, and determine whether there is sexual dimorphism in the display of this phenotype. Methods: Lateral cephalometric radiographs were obtained from 43 African-Brazilians within military personnel (28 males and 15 females, average age 22.4 ± 3.4 years) with normal occlusion, selected from a group of 394 volunteers. Thirty-one angular and linear measurements were evaluated. Student's t-test for independent samples was used to compare results with those established by European-American standards, previously described in the literature. Results: Considering the dentoalveolar pattern, seven angular and six linear measurements showed statistically significant differences (p< 0.001) when compared to Caucasian cephalometric standards. African-Brazilians' subjects showed lower cranial base angle (SNAr = 119.87 ± 5.66º) and anterior cranial base length (SN-distance = 68.63 ± 4.50 mm) (p< 0.001). The maxilla (SNA = 88.51 ± 3.23º) and the mandible (SNB = 85.06 ± 3.24º) were protruded in relation to the SN line (p< 0.001). Sexual dimorphism was significant for L1.NB (degrees) (p< 0.01), and interincisal angle (U1.L1) (p< 0.05). Conclusion: African-Brazilian young adults presented differences regarding dental and craniofacial characteristics, when compared to European-American norms. It can be stated that Caucasian cephalometric norms should not be applied to African-Brazilian faces.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar características de jovens adultos afro-brasileiros com oclusão excelente, incluindo protrusão bimaxilar, e compará-los com os padrões caucasianos europeu-americanos, para determinar se há dimorfismo sexual na exibição desse fenótipo. Métodos: Radiografias cefalométricas laterais foram obtidas de 43 afro-brasileiros militares (28 homens e 15 mulheres, idade média de 22,4 ± 3,4 anos) com oclusão normal, selecionados de um grupo de 394 voluntários. Foram avaliadas 31 medidas angulares e lineares. O teste t de Student para amostras independentes foi utilizado para comparar os resultados com os estabelecidos pelos padrões caucasianos europeu-americanos, descrito previamente na literatura. Resultados: Considerando o padrão dentoalveolar, sete medidas angulares e seis lineares apresentaram diferenças estatisticamente significativas (p< 0,001) quando comparadas aos padrões cefalométricos caucasianos. Sujeitos afro-brasileiros apresentaram menor ângulo da base do crânio (SNAr = 119,87 ± 5,66º) e comprimento da base craniana anterior (distância SN = 68,63 ± 4,50 mm) (p< 0,001). A maxila (SNA = 88,51 ± 3,23º) e a mandíbula (SNB = 85,06 ± 3,24º) estavam protruídas em relação à linha SN (p< 0,001). O dimorfismo de sexo foi significativo para L1.NB (graus) (p< 0,01) e ângulo interincisal (U1.L1) (p< 0,05). Conclusão: Jovens adultos afro-brasileiros apresentaram diferenças em relação às características dentárias e craniofaciais, quando comparados às normas europeias-americanas. Pode-se afirmar que as normas cefalométricas caucasianas não devem ser aplicadas às faces de indivíduos afro-brasileiros.

3D technology to measure dental arches and create a template for lingual brackets technique

ABSTRACT Objective: This study aims at identifying anatomical dimensions of dental arches, based on landmarks currently used in the lingual orthodontic technique, and create an archwire form template to be used in orthodontic clinics. Methods: Maxillary and mandibular dental casts of 140 Caucasian individuals with natural and normal occlusion were digitized (3D), and the images were analyzed with Delcam Power ShapeTM 2010 software. The dental arch shapes and sizes were obtained from 14 landmarks selected on the lingual surface of the teeth. Points and segments defined by the software were used to create an archwire form template. Results: Various dental arch patterns were found for both maxilla and mandible. The smallest sizes were found in females, and the largest were found in male subjects. Six categories were defined for each gender, three for the maxilla and three for the mandible (Small, Medium and Large). A template was created with eighteen anatomic lingual archwire designs, nine for the maxilla and nine for the mandible, for both genders. Conclusions: Landmarks evaluated in this study showed dental arch differences between genders. This information enables making orthodontic lingual archwires that are more compatible with the anatomical forms and sizes of the maxilla and mandible. The findings also allowed the creation of a template for an anatomic lingual metallic archwire form to be used in the lingual technique.

RESUMO Objetivo: O presente estudo tem como objetivo encontrar as formas anatômicas e dimensões das arcadas dentárias com base em pontos de referência utilizados na técnica ortodôntica lingual, e criar um diagrama com um maior número de arcos metálicos para serem utilizados na clínica ortodôntica. Métodos: 140 modelos de indivíduos caucasianos com oclusão normal e natural foram digitalizados (3D) e as imagens, analisadas com o software Delcam Power ShapeTM 2010. A determinação das formas e tamanhos das arcadas dentárias foi obtida a partir de 14 pontos selecionados na superfície lingual dos dentes. Outros pontos e segmentos foram utilizados, com o auxílio do software, para definir um diagrama. Resultados: Foram encontrados diferentes tamanhos de arcadas dentárias linguais, tanto para a maxila quanto para a mandíbula. Os menores tamanhos foram os femininos, e os maiores, os masculinos. Definiram-se seis tamanhos para cada sexo, sendo três para a maxila e três para a mandíbula, nomeados como P, M e G. Foi criado um diagrama com dezoito desenhos de arcos linguais anatômicos, nove para a maxila e nove para a mandíbula, para ambos os sexos. Conclusões: A posição dos pontos de referência nesse estudo evidenciou diferenças entre os sexos, o que permitiu a criação de arcos mais compatíveis com as formas e dimensões anatômicas da maxila e mandíbula. A diferença entre os tamanhos das arcadas dentárias linguais possibilitou a criação de um diagrama com formas de arcos metálicos linguais anatômicos para serem utilizados na técnica lingual, para auxiliar o profissional a criar os seus próprios arcos.

The correlation between external apical root resorption and electric pulp test responses: a prospective clinical trial

ABSTRACT Objective: The current study investigated the correlation between pulpal sensitivity to the electric pulp tester (EPT) and external apical root resorption (EARR) in four types of maxillary anterior teeth of fixed orthodontic treatment patients. Methods: In this prospective cohort study, 232 anterior teeth of 58 patients (mean age 18.96 ± 6.13 years) treated with fixed orthodontic treatment were examined. The EPT readings were recorded at twelve time points immediately before archwire insertion. Root resorption of four maxillary incisors were measured by means of parallel periapical radiographs at three time intervals (six months interval from the start) through design-to-purpose software to optimize data collection. A multiple linear regression model and Pearson correlation coefficient were used to assess the association of EPT values and observed EARR (p< 0.05). Results: The highest level of EPT measurement was recorded at initial visit, and then there was a decreasing trend in EPT level during treatment for the next six and twelve months. There was another increasing trend after six months till the finishing time of the treatment. There was a significant correlation between changes in root length and time of recording the root length (p< 0.001). There was significant positive correlation between changes in EPT level and amount of observed root resorption (p< 0.001). Conclusion: The relative decrease in electric pulp test level could be a diagnostic sign of root resorption during orthodontic treatment. Further studies with longer follow up are needed to confirm the current results.

RESUMO Objetivo: O presente estudo investigou a correlação entre a sensibilidade pulpar ao teste pulpar elétrico (TPE) e a reabsorção radicular apical externa (RRAE) nos quatro dentes anteriores superiores de pacientes em tratamento ortodôntico com aparelho fixo. Métodos: Nesse estudo de coorte prospectivo, foram avaliados 232 dentes anteriores de 58 pacientes (idade média 18,96 ± 6,13 anos) tratados com aparelho ortodôntico fixo. As leituras do TPE foram registradas em doze tempos de avaliação, imediatamente antes da inserção dos arcos. As reabsorções radiculares dos quatro incisivos superiores foram aferidas por meio da média das radiografias periapicais, em três intervalos de tempo (em intervalos de seis meses desde o início) por um software desenvolvido para essa finalidade, com o intuito de otimizar a coleta de dados. Para aferir a associação entre os valores de TPE e as RRAE observadas (p< 0,05), foram utilizados o modelo de regressão linear múltiplo e o coeficiente de correlação de Pearson. Resultados: O nível mais alto das medidas do TPE foi registrado na primeira visita e, daí em diante, houve uma tendência de diminuição no nível do TPE durante o tratamento, nos seis a doze meses seguintes. Houve, também, outra tendência de aumento após os seis meses até o término do tratamento, além de uma correlação significativa entre as mudanças no comprimento radicular e o tempo de registro do comprimento radicular (p< 0,001), bem como uma correlação positiva significativa entre as mudanças no nível do TPE e a quantidade de reabsorção radicular observada (p< 0,001). Conclusão: Uma diminuição relativa no nível de sensibilidade ao teste pulpar elétrico pode ser um sinal diagnóstico de reabsorção radicular durante o tratamento ortodôntico. Estudos futuros com acompanhamentos mais longos são necessários para confirmar os presentes resultados.

Zygomatic-maxillary cortical bone thickness in hyper, normo and hypodivergent patients

ABSTRACT Objective: The aim of this study was to evaluate the thickness of the zygomatic-maxillary cortical bone using computed tomography in different skeletal patterns. Methods: A total of 54 patients of both sexes, divided into three groups according to the vertical skeletal pattern, were evaluated for cortical bone thickness of the anterior slope of the zygomatic process of the maxilla, using cone beam computed tomography. Measurements were made at 2mm, 4mm, 6mm, 8mm and 10mm above from first molar mesial root apex. Vertical skeletal pattern was determined by Frankfurt mandibular angle (FMA). Results: The hyperdivergent pattern had the lowest cortical thickness value, nevertheless, no patient in the hyperdivergent group presented cortical thickness exceeding 2mm, and no patient in the hypodivergent group presented cortical thickness less than 1mm. However, the correlation between cortical thickness and mandibular plane angle was weak and not significant. Conclusion: Although higher prevalence of thick cortical was observed in the hypodivergent patients, and thin cortical groups in the hyperdivergent group, the vertical skeletal pattern could not be used as determinant of the zygomatic-maxillary cortical thickness.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar a espessura da cortical óssea zigomático-maxilar por meio de tomografia computadorizada em diferentes padrões esqueléticos. Métodos: Um total de 54 pacientes de ambos os sexos, divididos em três grupos, de acordo com o padrão esquelético vertical, foi avaliado quanto à espessura da cortical óssea na vertente anterior do processo zigomático da maxila, por meio de tomografia computadorizada de feixe cônico. As medidas foram feitas a 2mm, 4mm, 6mm, 8mm e 10mm acima do ápice da raiz mesial do primeiro molar. O padrão esquelético vertical foi determinado pelo Ângulo do Plano Mandibular (FMA). Resultados: O padrão hiperdivergente apresentou o menor valor de espessura de cortical. No entanto, nenhum paciente do grupo hiperdivergente apresentou espessura cortical superior a 2mm e nenhum paciente do grupo hipodivergente apresentou espessura cortical inferior a 1mm. No entanto, a correlação entre a espessura da cortical e o ângulo do plano mandibular foi fraca e não significativa. Conclusão: Embora tenha havido uma maior prevalência de cortical espessa no grupo hipodivergente e cortical fina no grupo hiperdivergente, o padrão esquelético vertical não pode ser utilizado como determinante da espessura cortical zigomático-maxilar.